Copy of TailCinch - How To Use

TailCinch

Quick tail tie-up for polo, farrier visits, vet care, grooming. A few hours at a time — not for turnout.

1. Braid the tail any way you like
2. Fuzzy velcro side up, hold it under your thumb, wrap around and secure
3. Pull the tab to release

RumpRbbr™

Protects against tail rubbing from anxiety, allergies, sweet itch and more.

Safe for turnout.

1. Braid the tail just a few loops and secure with the rubber band
2. Open the tail guard and flip the top part down
3. Slip the guard behind the tail, with the inside facing out towards you
4. Button all the snaps, secure the top D-ring strap (not too tight! Loose is best)
5. Swivel the guard around front on the tail and pop the top back up
6. Shimmy the guard up the tail as high as you can get it
7. Pull the bottom support straps once or twice through the braid loops and snap them to any snap on the lower rung of snaps at the bottom of the guard
8. Place a TailCinch Tail Tie on top of the braid, on top of the place where the support straps are fed
9. Use EITHER the Detachable Tailbag OR the Detachable Cincher next
10. Snap the piece you choose to the higher rung of snaps on the bottom of the guard. Tailbag you're done unless you want to add Swisher to the loop for fly swatting
11. Cincher, pull the drawstring tight, and tuck the loose pieces into the side pocket
    

Tailboot

Worn with a TailCinch underneath. Keeps the tail clean and protected in turnout, any weather.

1. Braid the tail, fold it up, apply a TailCinch Tail Tie
2. Pull the interior sock of the boot through the top of the braid
3. Tuck the entire tail into the interior sock
4. Close up the Tailboot with the velcro straps
5. Add the Swishser to swat flies
   

PoloCinch — Polo Wrap Guards

Keeps polo wraps in place through chukkers and barrels. Set of 4, no more electrical tape.

1. Place on your polo wraps to secure during work